Dolby Laboratories DP591 빠른 시작 매뉴얼 - 페이지 16

{카테고리_이름} Dolby Laboratories DP591에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolby Laboratories DP591 19 페이지. Object authoring tool
Dolby Laboratories DP591에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지)

페이지 인쇄
Dolby Laboratories DP591 빠른 시작 매뉴얼

4.8 Monitoring local output

Listen to the outputs of different configurations.
About this task
You can listen to the output of any configuration using the target device drop-down list. This
control enables you to determine what a particular dynamic object rendering configuration
would sound like before generating metadata.
Procedure
1. Select a presentation tab.
2. On the presentation tab, from the target device list, select a configuration that you want
to monitor.
Figure 7: Target device list
a) If you select Dolby Atmos, to specify the number of overhead speakers, open the
Settings menu.
b) Select Speaker Configuration.
c) From the Dolby Atmos Speaker Configuration drop-down list, select a desired
configuration.
You can monitor the presentation in the intended target device configuration (stereo, 5.1,
and so on) through the MADI output using the monitoring mode selection.

4.9 Monitoring loudness value

You can monitor loudness value according to one of three loudness standards as described
in these recommendations: ITU-R BS.1770-3, ITU-R BS.1770-3 with DI, and EBU R128.
Procedure
1. From the View menu, select Loudness Measurement.
The Loudness Measurement window appears and displays loudness value.
2. Optional: From the drop-down list, you can select a different loudness recommendation
measurement method.

4.10 Monitoring audio meters

View the audio meters to verify the input and output signals.
Dolby DP590 object authoring tool quick-start guide
24 June 2016
4.8 Monitoring local output
16