Dolby Laboratories DP591 Посібник із швидкого старту - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Конвертер мультимедіа Dolby Laboratories DP591. Dolby Laboratories DP591 19 сторінок. Object authoring tool
Також для Dolby Laboratories DP591: Посібник із швидкого старту (9 сторінок)
Друкувати сторінку
4.8 Monitoring local output
Listen to the outputs of different configurations.
About this task
You can listen to the output of any configuration using the target device drop-down list. This
control enables you to determine what a particular dynamic object rendering configuration
would sound like before generating metadata.
Procedure
1. Select a presentation tab.
2. On the presentation tab, from the target device list, select a configuration that you want
to monitor.
Figure 7: Target device list
a) If you select Dolby Atmos, to specify the number of overhead speakers, open the
Settings menu.
b) Select Speaker Configuration.
c) From the Dolby Atmos Speaker Configuration drop-down list, select a desired
configuration.
You can monitor the presentation in the intended target device configuration (stereo, 5.1,
and so on) through the MADI output using the monitoring mode selection.
4.9 Monitoring loudness value
You can monitor loudness value according to one of three loudness standards as described
in these recommendations: ITU-R BS.1770-3, ITU-R BS.1770-3 with DI, and EBU R128.
Procedure
1. From the View menu, select Loudness Measurement.
The Loudness Measurement window appears and displays loudness value.
2. Optional: From the drop-down list, you can select a different loudness recommendation
measurement method.
4.10 Monitoring audio meters
View the audio meters to verify the input and output signals.
Dolby DP590 object authoring tool quick-start guide
24 June 2016
4.8 Monitoring local output
16