closomat Palma Vita 설치 및 사용 설명서 - 페이지 8

{카테고리_이름} closomat Palma Vita에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. closomat Palma Vita 12 페이지.

Finishing the installation

On completion of installation and test

procedure, replace bowl cover.

Replace cistern cover. Ensuring the clips

on the lower rear edges engage inside

the bowl cover and the on/off switch is

displayed in the right hand side window.

Push in the seat buffer on the cistern cover.

Please advise us of installation address in order that we can

arrange the commission and activate the 12-month guarantee.

Hook brackets into position. Where

necessary adjust to provide a water tight

seal, adjust the rising block until the seals

are tight against the porcelain.

Correct fitted position of cistern cover clips

– shown from rear of unit.

Replace the seat by locating the 'seat

pivots' into the seat hulls fixed to the

pan – press the seat firmly to secure

its position.

Replace and tighten the front screw.

Replace the screw on the cistern cover and

carefully tighten.

Complete the installation by testing the

Closomat works, by again depressing the

seat and holding in one of the elbow pads.