CYP CH-514TXL 운영 매뉴얼 - 페이지 7

{카테고리_이름} CYP CH-514TXL에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CH-514TXL 14 페이지. Hdbaset lite hdmi over single cat5e/6/7 extender
CYP CH-514TXL에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄
CYP CH-514TXL 운영 매뉴얼

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter Front and Rear Panels

IR1 OUT
HDMI IN
1
IR1 OUT/Blaster
1
Connect to the supplied IR blaster for IR signal transmission to the
source equipment from IR1 IN's IR signal. Place the IR blaster in direct
line-of-sight of the equipment to be controlled.
HDMI IN
2
Connect to the HDMI input source devices such as a DVD player or a
Set-top Box with HDMI cable or DVI to HDMI cable.
IR2 IN/Extender
3
Connect to the supplied IR extender cable for IR signalreception
and transmission to IR2 OUT. Ensure that remote being used is within
the direct line-of-sight of the IR extender.
DC 5V
4
Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
CAT5e/6 OUT
5
Connect to the receiver unit with a single CAT5e/6 cable for
transmission of all data signals. The yellow LED will illuminate when
both transmitter and receiver are connected together with power
supply. The green LED will illuminate when the powersupply is
connected to the deivce.
3
IR2 IN
2
3
DC 5V
CAT5e/6 OUT
4
5