CYP CH-514TXL Kullanım Kılavuzu - Sayfa 7
Genişletici CYP CH-514TXL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CYP CH-514TXL 14 sayfaları. Hdbaset lite hdmi over single cat5e/6/7 extender
Ayrıca CYP CH-514TXL için: Kullanım Talimatları Kılavuzu (16 sayfalar)
Sayfayı Yazdır
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
IR1 OUT
HDMI IN
1
IR1 OUT/Blaster
1
Connect to the supplied IR blaster for IR signal transmission to the
source equipment from IR1 IN's IR signal. Place the IR blaster in direct
line-of-sight of the equipment to be controlled.
HDMI IN
2
Connect to the HDMI input source devices such as a DVD player or a
Set-top Box with HDMI cable or DVI to HDMI cable.
IR2 IN/Extender
3
Connect to the supplied IR extender cable for IR signalreception
and transmission to IR2 OUT. Ensure that remote being used is within
the direct line-of-sight of the IR extender.
DC 5V
4
Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
CAT5e/6 OUT
5
Connect to the receiver unit with a single CAT5e/6 cable for
transmission of all data signals. The yellow LED will illuminate when
both transmitter and receiver are connected together with power
supply. The green LED will illuminate when the powersupply is
connected to the deivce.
3
IR2 IN
2
3
DC 5V
CAT5e/6 OUT
4
5