CYP PU-507-KIT 운영 매뉴얼 - 페이지 6
{카테고리_이름} CYP PU-507-KIT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PU-507-KIT 11 페이지. V1.4 hdmi over single cat5e/6 hdbaset 5play, single lan, set (up to 100m)
CYP PU-507-KIT에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)
7. Operation Controls and Functions
7.1 Front Panel
Transmitter
①
①. HDMI In/Out: These slots are to connect with HDMI source equipment
such as DVD/Blu-ray player and HDMI TV/monitor with HDMI cables.
②. LAN: These slots are to connect with RJ-45 cable from the internet or
intranet system to PC/NB device for online signal sending over CAT5e/6
③. RS-232 In/Out: These slots are to connect with D-Sub 9pin cable from PC/
NB for RS-232 control and signal sending to the control device.
7.2 Rear Panel
Transmitter
①
②
③ ④
①. Power LED: This green LED will illuminate when the device is attached with
power supply.
②. DC 24V: This slot is where you plug the 24V DC power into the unit and
connect the adaptor to an AC outlet.
③. IR 1/2 Blaster: These slots are to connect with the IR blaster cable included
in the package for IR signal transmitting.
④. IR 1/2 Extender: These slots are to connect with the IR receiver cable
included in the package for IR signal receiving.
⑤. Link LED: This green LED will illuminate when the signal is detected from the
other end of the device.
⑥. CAT5e/6 Out/In: These slots are to be connected with a single CAT5e/6
cable for data transmitting.
②
③
⑥
⑤
Receiver
①
Receiver
①
③
3
②
③
④
⑤
⑥