CYP PU-507-KIT Посібник з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Подовжувач CYP PU-507-KIT. CYP PU-507-KIT 11 сторінок. V1.4 hdmi over single cat5e/6 hdbaset 5play, single lan, set (up to 100m)
Також для CYP PU-507-KIT: Посібник з експлуатації (16 сторінок)

Друкувати сторінку

7. Operation Controls and Functions

7.1 Front Panel

Transmitter

①

①. HDMI In/Out: These slots are to connect with HDMI source equipment

such as DVD/Blu-ray player and HDMI TV/monitor with HDMI cables.

②. LAN: These slots are to connect with RJ-45 cable from the internet or

intranet system to PC/NB device for online signal sending over CAT5e/6

③. RS-232 In/Out: These slots are to connect with D-Sub 9pin cable from PC/

NB for RS-232 control and signal sending to the control device.

7.2 Rear Panel

Transmitter

①

②

③ ④

①. Power LED: This green LED will illuminate when the device is attached with

power supply.

②. DC 24V: This slot is where you plug the 24V DC power into the unit and

connect the adaptor to an AC outlet.

③. IR 1/2 Blaster: These slots are to connect with the IR blaster cable included

in the package for IR signal transmitting.

④. IR 1/2 Extender: These slots are to connect with the IR receiver cable

included in the package for IR signal receiving.

⑤. Link LED: This green LED will illuminate when the signal is detected from the

other end of the device.

⑥. CAT5e/6 Out/In: These slots are to be connected with a single CAT5e/6

cable for data transmitting.

②

③

⑥

⑤

Receiver

①

Receiver

①

③

②

③

④

⑤

⑥