CYP PU-513L-KIT 운영 매뉴얼 - 페이지 8
{카테고리_이름} CYP PU-513L-KIT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PU-513L-KIT 16 페이지.
페이지 인쇄
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
IR OUT
HDMI IN
1
2
1
IR OUT
Connect to the supplied IR blaster for IR signal transmission to the source
equipment. Place the IR blaster in direct line-of-sight of the equipment
to be controlled.
2
HDMI IN
Connect to the HDMI input source devices such as a DVD player or a Set-
top Box with HDMI cable or DVI to HDMI cable.
3
RS 232 IN
Connect the 3.5mm mini-jack to D-Sub 9-pin female adaptor cable
(included in the package) to a PC or control system with D-Sub 9-pin
cable for the transmission of RS-232 commands.
4
DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet.
5
CAT5e/6/7 OUT
Connect to the receiver unit with a single CAT5e/6 /7cable for
transmission of all data signals. The yellow LED will illuminate when
both the transmitter and receiver are connected and are powered. The
green LED will illuminate when the device is connected to the power
supply.
8
RS232 IN
3
DC 5V
CAT5e/6 OUT
4
5