CYP PU-607BDWP-TX 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP PU-607BDWP-TX에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP PU-607BDWP-TX 16 페이지. Hdmi over single cat5e/6/7 hdbaset - bi-directional poc wallplate transmitter (full 5play & single lan up to 100m)

페이지 인쇄

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter

IR 2 EXTENDER: Connect to the supplied IR Extender cables for IR

signal reception. Ensure that remote being used is within the direct

line-of-sight of the IR Extender.

DC 24V: Connect the power adaptor included in the package

and then connect to AC power to activate the device.

IR 1 BLASTER: Connect to the supplied IR Blaster cable for IR

signal transmission. Place the IR Blaster in direct line of sight of the

equipment to be controlled.

RS-232 IN: Connect to a PC or Laptop with D-Sub 9 pin male cable for

the transmission of RS-232 commands.

LAN: Connect to an internet or network connection.

When the Transmitter or any compatible LAN equipped Receivers are

connected to a network, this allows the network access (including

internet access if available) to be shared between the Transmitter and

all connected Receivers. Connect any Ethernet equipped device e.g.

a Smart TV or games console to the LAN port of a receiver for that

device to share the network/internet access.

IR 2

EXTENDER

IR 1

BLASTER

RS-232

DC 24V

LAN

HDMI IN

LINK

POWER