CYP PU-607BDWP-TX Manual de operação - Página 8
Procurar online ou descarregar pdf Manual de operação para Extensor CYP PU-607BDWP-TX. CYP PU-607BDWP-TX 16 páginas. Hdmi over single cat5e/6/7 hdbaset - bi-directional poc wallplate transmitter (full 5play & single lan up to 100m)
Imprimir página
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter
1
IR 2 EXTENDER: Connect to the supplied IR Extender cables for IR
signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
2
DC 24V: Connect the power adaptor included in the package
and then connect to AC power to activate the device.
3
IR 1 BLASTER: Connect to the supplied IR Blaster cable for IR
signal transmission. Place the IR Blaster in direct line of sight of the
equipment to be controlled.
4
RS-232 IN: Connect to a PC or Laptop with D-Sub 9 pin male cable for
the transmission of RS-232 commands.
5
LAN: Connect to an internet or network connection.
When the Transmitter or any compatible LAN equipped Receivers are
connected to a network, this allows the network access (including
internet access if available) to be shared between the Transmitter and
all connected Receivers. Connect any Ethernet equipped device e.g.
a Smart TV or games console to the LAN port of a receiver for that
device to share the network/internet access.
8
1
2
IR 2
EXTENDER
IR 1
BLASTER
RS-232
IN
3
4
DC 24V
LAN
HDMI IN
5
6
LINK
POWER
7
8