DOLD VARIMETER IMD RL 5898 원본 지침 번역 - 페이지 7
{카테고리_이름} DOLD VARIMETER IMD RL 5898에 대한 원본 지침 번역을 온라인으로 검색하거나 PDF를 다운로드하세요. DOLD VARIMETER IMD RL 5898 17 페이지. Insulation monitor
DOLD VARIMETER IMD RL 5898에 대해서도 마찬가지입니다: 원본 지침 번역 (8 페이지), 모니터링 기술 (12 페이지), 모니터링 기술 (12 페이지)
페이지 인쇄
Technical Data
Clearance and creepage
distances
Rated insulation voltage:
Overvoltage category:
Rated impuls voltage /
pollution degree:
Measuring circuit L(+)/L(-) to
auxiliary voltage A1(+)/A2 and
indicator relay contacts K1, K2: 4 kV / 2
Auxiliary voltage A1(+)/A2 to
indicator relay contacts K1, K2: 4 kV / 2
Indicator relay contact K1 to
indicator relay contacts K2:
Bus A, B to
measuring circuit L(+)/L(-) and
auxiliary voltage A1(+)/A2 and
indicator relay contacts K1, K2: 6 kV / 2
Insulation test voltage
Routine test:
EMC
Electrostatic discharge (ESD): 8 kV (air)
HF irradiation:
80 MHz ... 1 GHz:
1 GHz ... 2.7 GHz:
Fast transients:
Surge voltage
Between
wires for power supply:
Between wire and ground:
HF-wire guided:
Interference suppression:
Degree of protection
Housing:
Terminals:
Housing:
Vibration resistance:
Shock resistance:
Climate resistance:
Terminal designation:
Wire connection
Cross section:
Stripping length:
Wire fixing:
Wire connection Bus
pluggable cage-clamp terminal: 0,14 ... 0,5 mm
Insulation of wires or
sleeve length:
Fixing torque:
Mounting:
Mounting position:
Weight:
Dimensions
Width x height x depth:
Classification to DIN EN 50155
Vibration and
shock resistance:
Ambient temperature:
Protective coating of the PCB: No
300 V
III
IEC 60664-1
4 kV / 2
AC 2,5 kV; 1 s
AC 4 kV; 1 s
IEC/EN 61326-2-4
IEC/EN 61000-4-2
20 V / m
IEC/EN 61000-4-3
10 V / m
IEC/EN 61000-4-3
2 kV
IEC/EN 61000-4-4
1 kV
IEC/EN 61000-4-5
2 kV
IEC/EN 61000-4-5
20 V
IEC/EN 61000-4-6
Limit value classe B
EN 55011
IP 30
IEC/EN 60529
IP 20
IEC/EN 60529
Thermpolastic with V0 behaviour
according to UL subject 94
Amplitude 0.35 mm,
Frequency 10 ... 55 Hz, IEC/EN 60068-2-6
frequency 2 ... 13.2 Hz, 13.2 ... 100 Hz,
acceleration ± 0.7 gn IEC/EN 60068-2-6
10 gn / 11 ms, 3 pulses IEC/EN 60068-2-27
40 / 070 / 04
IEC/EN 60068-1
EN 50005
DIN 46228-1/-2/-3/-4
0.5 ... 4 mm² (AWG 20 - 10) solid or
0.5 ... 4 mm² (AWG 20 - 10)
stranded wire without ferrules
0.5 ... 2.5 mm² (AWG 20 - 10)
stranded wire with ferrules
6.5 mm
Cross-head screw / M3 box terminals
solid or
2
0,14 ... 0,25 mm
stranded ferruled
2
7 mm
0.5 Nm
DIN rail
IEC/EN 60715
Vertical
(air flow trough ventilation slots
must be ensured)
Approx. 205 g
52.2 x 90 x 71 mm
Category 1, Class B
IEC/EN 61373
OT1, OT2 compliant
Standard Types
RN 5897.12/321
Article number:
• Auxiliary voltage:
RN 5897.12/321
Article number:
• Auxiliary voltage:
• Outputs:
• Setting range pre-warning:
• Setting range alarm:
• With connection facility of a coupling device RL 5898 or RP 5898
• Max. line capacitance:
• Energized or de-energized on trip
• Selection of type of network
• Width:
Ordering Example for variants
RN 5897 .12 /_ _ _ AC/DC 24 ... 60 V 1 kΩ ... 500 kΩ 1 kΩ ... 500 kΩ
7
AC/DC 24 ... 60 V
0069399
AC/DC 24 ... 60 V
AC/DC 100 ... 230 V
0069400
AC/DC 100 ... 230 V
1 changeover contact for pre-warning
1 changeover contact for alarm
1 kΩ ... 500 kΩ
1 kΩ ... 500 kΩ
5 µF
52.5 mm
Setting range Pre-warning
Setting range alarm
Auxiliary voltage
Variant, if required
Contacts
Type
12.07.22 en / 604A