Ashland PED50B 작동, 성능 및 사양 - 페이지 6

{카테고리_이름} Ashland PED50B에 대한 작동, 성능 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashland PED50B 8 페이지. Pedestal sump pumps, thermoplastic/cast iron/bronze

Inlet Pipe

Pedestal Pumps

Models: PED Series

Installation

Discharge piping can be

PVC, polypipe or

galvanized steel.

CAUTION:

Check local codes before installing

pump.

STEP 1:

Pump must be installed in a suitable

gas tight, properly vented basin which

is at least 24" deep and at least 14"

wide for pumps fitted with vertical

on/off switches.

STEP 2:

Pump must be placed on a hard sur-

face in a sump that has been cleared

of all debris. Never place the pump

on clay, earth or gravel surfaces and it

is suggested the pump be placed on

two bricks approximately 2" apart.

STEP 3:

Connect the discharge pipe, fittings

and check valve to the discharge port

of the pump. It is recommended that

the discharge pipe diameter be equal

to or larger than the discharge size of

the pump.