Cypress CY3210-PSoCEVAL1 빠른 시작 매뉴얼

{카테고리_이름} Cypress CY3210-PSoCEVAL1에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CY3210-PSoCEVAL1 2 페이지.
Cypress CY3210-PSoCEVAL1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Cypress CY3210-PSoCEVAL1 빠른 시작 매뉴얼
1
Insert the CY3210-PSoCEVAL1 kit CD in
the CD drive of your PC.
Install the kit contents, PSoC Designer,
and PSoC Programmer.
3
Plug in the MiniProg to the ISSP header
on the CY3210-PSoCEVAL1 board.
Connect the MiniProg to the PC using
the USB cable provided with the kit.
CY3210-PS
CEVAL1 EVALUATION KIT
O
QUICK START GUIDE
2
Remove CY3210-PSoCEVAL1 board from
its package.
Connect jumper (shunt) at JP1 and JP2.
Connect the single strand jumper wire
between P01 and VR.
4
Open PSoC Programmer; click on the
Toggle Power button to power the board.
Vary the potentiometer; the output hex
values are displayed on the LCD module.