Cypress CY3210-PSoCEVAL1 Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cypress CY3210-PSoCEVAL1. Cypress CY3210-PSoCEVAL1 2 pagina's.
Ook voor Cypress CY3210-PSoCEVAL1: Snelstarthandleiding (2 pagina's)
Pagina afdrukken
1
Insert the CY3210-PSoCEVAL1 kit CD in
the CD drive of your PC.
Install the kit contents, PSoC Designer,
and PSoC Programmer.
3
Plug in the MiniProg to the ISSP header
on the CY3210-PSoCEVAL1 board.
Connect the MiniProg to the PC using
the USB cable provided with the kit.
CY3210-PS
CEVAL1 EVALUATION KIT
O
QUICK START GUIDE
2
Remove CY3210-PSoCEVAL1 board from
its package.
Connect jumper (shunt) at JP1 and JP2.
Connect the single strand jumper wire
between P01 and VR.
4
Open PSoC Programmer; click on the
Toggle Power button to power the board.
Vary the potentiometer; the output hex
values are displayed on the LCD module.