Ashly Protea NE8250 사용 설명서 - 페이지 4

{카테고리_이름} Ashly Protea NE8250에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly Protea NE8250 8 페이지. Network enabled multi-channel power amplifiers
Ashly Protea NE8250에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (16 페이지), 사양 (2 페이지), 사양 시트 (2 페이지), 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (20 페이지), 운영 매뉴얼 (20 페이지)

페이지 인쇄

Getting Started

Warning: Before ampliﬁer installation, ensure that your ampliﬁer is not connected to power

and all control levels are turned down (counterclockwise).

2.1

Proper Cooling

Do not block any of the ampliﬁer ventilation vents. When using an equipment rack, mount the

units directly on top of each other. Do not block rear, front, or side air vents. The side walls of the

rack should be a minimum of one inch (2.5cm) away from the ampliﬁer sides, and the back of the

rack should be open.

2.2

Setup Procedure

1. Use the "Primary" or "Secondary" port and a Cat 5 cable to connect to the ACENet switch.

Do not connect both.

2. Connect the "10/100 Ethernet" port to the ACENet switch.

3. Connect the AC power cord.

The Analog Input Connectors are not used in the ASTi system setup.

Warning: Do not connect or disconnect speakers or ACENet while the ampliﬁer is powered

on.