Ashly Protea NE8250 Kullanım Kılavuzu - Sayfa 4

Amplifikatör Ashly Protea NE8250 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ashly Protea NE8250 8 sayfaları. Network enabled multi-channel power amplifiers
Ayrıca Ashly Protea NE8250 için: Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Teknik Özellikler (2 sayfalar), Şartname Sayfası (2 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (20 sayfalar), Kullanım Kılavuzu (20 sayfalar)

Getting Started

Warning: Before ampliﬁer installation, ensure that your ampliﬁer is not connected to power

and all control levels are turned down (counterclockwise).

2.1

Do not block any of the ampliﬁer ventilation vents. When using an equipment rack, mount the

units directly on top of each other. Do not block rear, front, or side air vents. The side walls of the

rack should be a minimum of one inch (2.5cm) away from the ampliﬁer sides, and the back of the

rack should be open.

2.2

1. Use the "Primary" or "Secondary" port and a Cat 5 cable to connect to the ACENet switch.

Do not connect both.

2. Connect the "10/100 Ethernet" port to the ACENet switch.

3. Connect the AC power cord.

The Analog Input Connectors are not used in the ASTi system setup.

Warning: Do not connect or disconnect speakers or ACENet while the ampliﬁer is powered

on.