Ashly GQX-3102 운영 매뉴얼 - 페이지 5

{카테고리_이름} Ashly GQX-3102에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashly GQX-3102 13 페이지. Graphic equalizer
Ashly GQX-3102에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (12 페이지), 기술 노트 및 사양 (2 페이지)

페이지 인쇄

Operator Manual – GQX-3102 Equalizer

GQX Equalizers

GQX equalizers are a second generation design including many refinements on the original

GQ models. Lower noise and distortion, greater accuracy, and additional output options are

the result. We continue using "Q" enhanced Wein bridge filters and interleaved summing for

constant "Q", low ripple, and minimum filter interaction. A servo-balanced output stage

simulates a true transformer output to allow interfacing with virtually any type of load.

Connectors & Cables

Your GQX series equalizer is provided with three different connector types:

1. 1/4 inch stereo phone jacks (TRS)

2. Three pin XLR type connectors

3. Euroblock screw terminal connectors

These connectors will allow interfacing to most professional audio products. Inputs as well

as servo-balanced outputs can be used balanced or unbalanced. When possible, balanced

connections are recommend between all components in your system, as this eliminates

ground-loop induced hum and noise.

Unbalanced Connections and Grounding

If you must use unbalanced connectors, the negative lead of the connector should be tied to

the ground lead. Using unbalanced connections could result in chassis ground-loop noise.

Altering the signal/chassis ground relationship in equipment connected to your GQX unit

may eliminate the noise.

Page - 5

Introduction – 4

GQX Equalizers – 5

Connectors & Cables – 5

Grounding

Physical Description - 6

Installation – 7

Typical Applications - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11