Ashly GQX-3102 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt nagrywający Ashly GQX-3102. Ashly GQX-3102 13 stron. Graphic equalizer
Również dla Ashly GQX-3102: Instrukcja obsługi (16 strony), Instrukcja obsługi (12 strony), Uwagi techniczne i specyfikacje (2 strony)

Drukuj stronę

Operator Manual – GQX-3102 Equalizer

GQX Equalizers

GQX equalizers are a second generation design including many refinements on the original

GQ models. Lower noise and distortion, greater accuracy, and additional output options are

the result. We continue using "Q" enhanced Wein bridge filters and interleaved summing for

constant "Q", low ripple, and minimum filter interaction. A servo-balanced output stage

simulates a true transformer output to allow interfacing with virtually any type of load.

Connectors & Cables

Your GQX series equalizer is provided with three different connector types:

1. 1/4 inch stereo phone jacks (TRS)

2. Three pin XLR type connectors

3. Euroblock screw terminal connectors

These connectors will allow interfacing to most professional audio products. Inputs as well

as servo-balanced outputs can be used balanced or unbalanced. When possible, balanced

connections are recommend between all components in your system, as this eliminates

ground-loop induced hum and noise.

Unbalanced Connections and Grounding

If you must use unbalanced connectors, the negative lead of the connector should be tied to

the ground lead. Using unbalanced connections could result in chassis ground-loop noise.

Altering the signal/chassis ground relationship in equipment connected to your GQX unit

may eliminate the noise.

Page - 5

Introduction – 4

GQX Equalizers – 5

Connectors & Cables – 5

Grounding

Physical Description - 6

Installation – 7

Typical Applications - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11