Cypress Envirosystems WPT-800-DB Series 설치 매뉴얼 - 페이지 4

{카테고리_이름} Cypress Envirosystems WPT-800-DB Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress Envirosystems WPT-800-DB Series 20 페이지. Wpt-db series deadband wireless pneumatic thermostat

페이지 인쇄

Figure 3. Removing the Universal Wall Bracket

Adjust the Universal Wall Bracket against the old thermostat position, such that

any two slots on the wall bracket match the existing two screw holes on the wall,

and the large center opening is aligned with the air tube(s). The Universal Wall

Bracket is shown in Figure 4.

Pull the air tubes through the central opening of the Universal Wall Bracket.

Affix the Universal Wall Bracket to the wall with two screws, as shown in Figure 5.

Note: The provided Wall Anchors can be used if existing receptacles are not in the

correct location, or if they are damaged.

Figure 5. Mounting the Universal Wall Bracket

Document No. 910-00014-01, Rev. 04

Unscrew these two screws to

Dismount wall bracket from rear side

Figure 4. Universal Wall Bracket

WPT-DB Installation Manual

Page 4 of 20