Cypress Envirosystems WPT-800-DB Series Kurulum Kılavuzu - Sayfa 4

Termostat Cypress Envirosystems WPT-800-DB Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cypress Envirosystems WPT-800-DB Series 20 sayfaları. Wpt-db series deadband wireless pneumatic thermostat

Sayfayı Yazdır

Figure 3. Removing the Universal Wall Bracket

Adjust the Universal Wall Bracket against the old thermostat position, such that

any two slots on the wall bracket match the existing two screw holes on the wall,

and the large center opening is aligned with the air tube(s). The Universal Wall

Bracket is shown in Figure 4.

Pull the air tubes through the central opening of the Universal Wall Bracket.

Affix the Universal Wall Bracket to the wall with two screws, as shown in Figure 5.

Note: The provided Wall Anchors can be used if existing receptacles are not in the

correct location, or if they are damaged.

Figure 5. Mounting the Universal Wall Bracket

Document No. 910-00014-01, Rev. 04

Unscrew these two screws to

Dismount wall bracket from rear side

Figure 4. Universal Wall Bracket

WPT-DB Installation Manual

Page 4 of 20