Ashton AURORA 1000 사용자 설명서 - 페이지 9

{카테고리_이름} Ashton AURORA 1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ashton AURORA 1000 16 페이지.

페이지 인쇄

stereo speaker system is automatically shut off . The sound can

Connecting an MP3/CD Player

be heard from headphones.

Jack2: When a pair of headphones is plugged into the Jack 2, the

sound can be heard from headphones and speakers of the

Connect the audio output of an MP3/CD player or other audio source

instrument.

to the stereo AUX. IN jack on the rear panel.

The input signal is mixed with the piano signal, allowing you to play

Note ：

along.

Do not listen with the headphones at high volume for long periods of

time. Doing so may cause hearing loss.

Connecting an

The rear-panel AUX.OUT jack delivers the output of the instrument for

Connecting a Computer

connection to a keyboard amplifier, stereo sound system, a mixing

uSb jack

console, or tape recorder. Use an audio cord to plug into the AUX.OUT

jack located on the rear board then plug the other end of the cord into

Connect PC or other USB host devices that support USB audio

The USB jack can be used to connect the keyboard to a PC

AUX.IN of the amplifier.

For devices with USB cable, you can simply connect the MIDI/USB

or other USB devices that support USB audio.

converter to your USB connector on the device and plug the USB cable

Note:

For devices with a USB cable, after the driver is installed

into the piano, after the driver is installed and initialization is finished,

To avoid damaging the speakers, please ensure that the volume has

and initialization is finished, you can choose USB Audio Device

you can choose USB Audio Device in the device menu of the software

been set to the minimum level before connecting the power and other

in the device menu of the software to begin transfering MIDI

to transfer midi data.

devices.

data.

Note:

To avoid damage, turn the power switch on this keyboard and

Do not select USB audio device in both of input and output setting

all related devices OFF if you want to plug or unplug devices

together, otherwise the sound overlaps.

into/out of this instrument.

Connecting an MP3/CD Player

mp3/cd player

Connect the audio output of an MP3/CD player or other audio source

to the stereo AUX. IN jack on the rear panel.

aw_CDP6000_Manual_G03_120423

The input signal is mixed with the piano signal, allowing you to play

Connect the audio output of an MP3/CD player or other

2012� � 4� � 23� �

15:34:16

along.

audio source to the stereo AUX IN jack through the rear

panel. The input signal will be mixed with the piano signal,

allowing you to play along to a song on the external device.

Adjusting the Volume

Rotate the [VOLUME] knob rightwards, the volume increases and vice

Connecting a Computer

adjuSting the volume

verse.

Rotate the [VOLUME] knob rightwards, the volume increases and vice

Rotate the [VOLUME] knob in a clockwise manner to increase

verse.

Connect PC or other USB host devices that support USB audio

the volume, or a counter-clockwise manner to decrease it.

For devices with USB cable, you can simply connect the MIDI/USB

converter to your USB connector on the device and plug the USB cable

into the piano, after the driver is installed and initialization is finished,

you can choose USB Audio Device in the device menu of the software

to transfer midi data.

Listening to the Song

Note:

Listening to the Song

liStening to a Song

Do not select USB audio device in both of input and output setting

Playing Demo song

together, otherwise the sound overlaps.

demo Song

Playing Demo song

While holding down the [FUNCTION] button, press [L/R] button to start

While holding down the [FUNCTION] button, press the [L/R]

the demo song playing. And all the LEDs on the panel will flash

button to play the demo song. All the LEDs on the panel will

While holding down the [FUNCTION] button, press [L/R] button to start

simultaneously.

flash simultaneously. Repeat, or press the [START/STOP]

the demo song playing. And all the LEDs on the panel will flash

button, to stop playing. The LEDs will stop flashing to indicate

simultaneously.

Do it again or press [Start/Stop] button to stop playing, and the LED

will stop flash.

this mode has stopped.

Do it again or press [Start/Stop] button to stop playing, and the LED

Note:

will stop flash.

The keyboard will be disabled when the demo song is playing.

The keyboard would be disabled when the demo song is playing.

Note:

The keyboard would be disabled when the demo song is playing.

Playing Song

There are total 20 songs in this digital piano (see Appendix).

Each song can be practiced in the MELODY OFF mode.

There are total 20 songs in this digital piano (see Appendix).

Start Song

Each song can be practiced in the MELODY OFF mode.

While holding down the [FUNCTION] button, press [Start/Stop]

button to start the song playing. All songs will be played in a loop.

Start Song

While holding down the [FUNCTION] button, press [Start/Stop]

Loop

button to start the song playing. All songs will be played in a loop.

While only press [Start/Stop] button, it will play the current song

repeatedly.

Loop

While only press [Start/Stop] button, it will play the current song

Audio Equipment

MIN

VOLUME

MAX

MIN

MAX

VOLUME

FUNCTION

SONG

DEMO

SONG

DEMO

FUNCTION

SONG

DEMO

SONG

DEMO

100