ASI FS-0700 설치 매뉴얼 - 페이지 4
{카테고리_이름} ASI FS-0700에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASI FS-0700 6 페이지. Freestanding plastic laminate sanitizing station
PODIUM MOUNTED AUTOMATIC GEL HAND SANITIZER DISPENSER (HSD) INSTALLATION GUIDE (Pg 2 of 4)
4. Connect clear supply flex tubing (provided attached to fitting on pump/control housing) to the 6L tank
(supplied) through the port in the cap so that tube end is just above bottom of tank. (see Figs. 4 and 4.a)
FLEX TUBE
MOTOR &
PUMP MODULE
SUPPLY TUBE
5. Install battery box (if so provided) on inside face of access door at predrilled screw holes with two (2) № 8 x
5/8" Type AB Phillips pan head stainless steel screws (provided). Load six (6) 'D'-size 1.5V cells (by others)
in battery carrier tray by removing two (2) Phillips screws and placing batteries according to polarity
indication. Re-install battery carrier tray and re-tighten the screws, plug battery cable jack into battery box
socket in cover handle and screw lock cover. Alternatively, plug AC Adapter (Model No 0390-ACA, if so
provided) into GFCI power outlet (by others) located within reach range of secured cable (straight length is
13.5 ft [4115] and will be reduced by securing wraps and allowable slack) on tank handle (or other securing
means, by others) and plug connector into mating inline power connector. (see Fig. 5)
AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
(914) 476.9000 • (914) 476.0688
www.americanspecialties.com
Fig. 4
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
COM CABLE
SANITIZER
DISPENSER
PRIME BUTTON
1/16" [2]
Fig. 5
MODEL №:
ISSUED:
REVISED:
SUPPLY TUBE
Fig. 4.a
0390-HSD
30 SEP 2020
7 OCT 2020