Cypress Semiconductor CYALKIT-E03 키트 매뉴얼 - 페이지 4
{카테고리_이름} Cypress Semiconductor CYALKIT-E03에 대한 키트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress Semiconductor CYALKIT-E03 19 페이지. Solar-powered bluetooth low energy sensor beacon 5 pack
Cypress Semiconductor CYALKIT-E03에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄Safety Information
Regulatory Compliance
The CYALKIT-E03 Solar-Powered Bluetooth Low Energy (BLE) Sensor Beacon 5 Pack is intended for use as a development
platform for hardware or software in a laboratory environment. The board is an open system design, which does not include
a shielded enclosure. This may cause interference with other electrical or electronic devices in close proximity. In a domestic
environment, this product may cause radio interference. In this case, the user may be required to take adequate preventive
measures. Also, the board should not be used near any medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default may affect its
performance and cause interference with other apparatus in the immediate vicinity. If such interference is detected, suitable
mitigating measures should be taken.
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
The CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack as shipped from the factory has been
verified to meet the requirements of CE as a Class A product.
The CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack contains electrostatic
discharge (ESD) sensitive devices. Electrostatic charges readily accumulate on the human
body and any equipment and can discharge without detection. Permanent damage may occur
to devices subjected to high-energy discharges. Proper ESD precautions are recommended
to avoid performance degradation or loss of functionality. Store unused CYALKIT-E03 boards
in the protective shipping package.
End of Life/Product Recycling
The end of life of this kit is five years after the date of manufacture mentioned on the back of
the box. Contact your nearest recycler to discard the kit.
4