Cypress Semiconductor CYALKIT-E03 키트 매뉴얼 - 페이지 5
{카테고리_이름} Cypress Semiconductor CYALKIT-E03에 대한 키트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress Semiconductor CYALKIT-E03 19 페이지. Solar-powered bluetooth low energy sensor beacon 5 pack
Cypress Semiconductor CYALKIT-E03에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄Safety Information
General Safety Instructions
ESD Protection
ESD can damage boards and their associated components. Cypress recommends that you perform procedures only at an
ESD workstation. If one is not available, use appropriate ESD protection by wearing an antistatic wrist strap attached to
chassis ground (any unpainted metal surface) on your board when handling parts.
Handling Boards
CYALKIT-E03 boards are sensitive to ESD. Hold the board only by its edges. After removing the board from its box, place it
on a grounded, static-free surface. Use a conductive foam pad, if available. Do not slide the board over any surface.
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
5