Cyrusher LCD-S700 컴퓨터 매뉴얼 - 페이지 9

{카테고리_이름} Cyrusher LCD-S700에 대한 컴퓨터 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyrusher LCD-S700 16 페이지. For bike models xf650/xf690/xf770
Cyrusher LCD-S700에 대해서도 마찬가지입니다: 컴퓨터 매뉴얼 (16 페이지)

페이지 인쇄
Cyrusher LCD-S700 컴퓨터 매뉴얼
System Parameter Settings
In the boot state, long press the button
setting state(image 14). Under this state, setting the cyclocomputer, then long press
the button
and
setting state automatically.
In the parameter setting state, shortly press the button
parameter setting, press the button
figure of the last item
1) Back Brightness
Showing P01, shortly press the button
/
to show 1-3,1 is the darkest backlight, 3
is the brightest. 2 is the default state, as the
image 14 shows
2) Metric/Imperial
Showing P02, shortly press the button
/
to switch the display of km/h or mph to
set metric/imperial, the default state is km/h,
as the image 15,16 shows
SPEED
Image 15
CYRUSHER.COM
again to exit the setting state or No Operation(10s) and to exit
to switch setting item and save the parameter
km
and
, the system enters parameter
Page 8
/
to adjust the figure of
SPEED
Image 14
SPEED
mile
Image 16