Ega Master 57666 사용 설명서 - 페이지 10
{카테고리_이름} Ega Master 57666에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ega Master 57666 18 페이지. Máquina de calibración de par
페이지 인쇄
1
.
Turn the meter on and select the desired torque.
2
.
Place the torque wrench in the housing.
3
.
We turn the crank to the left until the torque shown by the meter drops to the
desired torque (if you want to raise the torque, turn the crank to the right).
1
Remark: For making correct calibration test, it is advised to follow international
standard procedures: for example, international standard ISO6789 or similar.
Important: Overload in the toque tester can damage it.
Keep the machine clean.
Perform periodic torque tester calibration.
10
QUICK USE GUIDE
Before starting the calibration:
-
the torque wrench must not be loaded.
-
make sure the torque tester is on when calibrating.
2
MAINTENANCE
3