1010music Blackbox 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} 1010music Blackbox에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 1010music Blackbox 4 페이지.
1010music Blackbox에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)

페이지 인쇄

the top of the touch screen. If it is blue, touch the on-screen Song button to deactivate

Song mode. Now, push SEQS so we can watch the sequences as they play. Push PLAY

now and you will hear the selected sequences play. A progress bar at the bottom of each

active sequence cell shows you the play state of that sequence. Touch a sequence cell to

activate or deactivate it. If you push PADS you can see the pads that are being triggered

by the sequencer over time. The sequences will play in a loop until you deactivate them or

push STOP. If any pads remain playing after you push STOP, you can end them by

pushing STOP a second time.

Playing sequences is fun, but recording your own is even better. The pink square is the

currently selected sequence. You can see the sequence number of the selected sequence

at the top of the screen both on the Sequence and the Pads screen (as long as you are not

in Song mode). Select an empty sequence cell and we will record into it. Push PADS to

go to the Pads screen. Hold down the REC button and push PLAY to start recording a

sequence. After the 4 beat count down, tap some pads to create a sequence. By default,

the sequence is one bar long. Blackbox will play the sequence in a loop as soon as you

finish recording it. If you tap some more pads, you will add more pad triggers to the

sequence. Push REC to stop recording while the sequence still plays. You can choose

different sequences to record into while the other sequences are playing. Press STOP

when you want the sequences to stop.

You can view and edit the sequence by pressing INFO with the sequence cell selected.

Toggle the piano roll mode between PADS and KEYS view by touching the view selector

to the right of the grid icon. You can touch the screen to add notes, and turn knobs to

select and adjust the length of notes. In PADS view, each row represents a different pad

and each bar represents a trigger of that pad. In KEYS view, each row represents a note

on the keyboard and the bars represent note events. The black and white bars on the left

side of the screen represent the notes on a keyboard and the Cs are numbered to show

you which octave you are in. Use pinch and stretch touch gestures to zoom in and out on

the piano roll. Push INFO to cycle through more sequence parameters, such as Step

Length, Step Count and Quant Size. The top left grid icon reminds you which sequence

you are editing. In KEYS view, the top right grid icon shows which pad is currently controlled in the piano roll. Touch

this icon to switch to a different pad if you want more than one pad in the sequence.

Before we move on to song sections, go back to the sequences screen and touch DEACT on the right. This will

deactivate all sequences.

Song Sections

Song sections allow you to record a series of on and off events for sequences. You can record multiple sequences

simultaneously, with independent start and stop times for each one. To hear a song section by itself, make sure all of the

sequences are deactivated first. Then push the SONG button to view the Song screen. Touch the on-screen Song button

to toggle the Song mode state to active (blue) if needed. Turn off Loop mode by touching the Loop button as well. Now

push the PLAY button and blackbox will play back a previously recorded song, section by section. The currently playing

section is highlighted in pink. In Song mode, the context display at the top of the screen now displays the name of the

May 2, 2019

Firmware Version 1.0.2

Sequences

Piano Roll Editor in

PADS View

Piano Roll Editor in

KEYS View

P. 3 of 4