1010music Blackbox 빠른 시작 매뉴얼

{카테고리_이름} 1010music Blackbox에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 1010music Blackbox 6 페이지.
1010music Blackbox에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지)

Blackbox Quick Start

Guide

Blackbox is a compact sampling studio from 1010music. It

lets you gather samples, arrange them into sequences, and

record the sequences into song sections. You can play

sequences by tapping on the pads, touching the virtual

keyboard, or playing a MIDI device. You can further refine

your sound by applying FX to pads and by mixing the sound

levels and stereo effects. All of this work can be saved

together into a Preset.

Blackbox was designed so that you build your song by

working through the buttons from left to right. You can certainly jump around and do things in any order, but the

general flow is to start on the left and move to the right. You start by selecting a preset with the samples you want to

use or by building your own set of samples on the PADS screen. You can then use the PADS and KEYS screens to trigger

the samples. Once you have a riff you like, you can select a sequence cell on the SEQ screen and then use PADS or KEYS

to record one or more pads into a sequence.

Next you can use Song mode on the SONG page to record start and stop events for one or more sequences. You can

use any combination of sequences in any section, and any combination of pads in any sequence. Along the way you can

save your work into the current preset or a new one on the PSET screen.

Figure 1: Pads, Sequences and Sections

Setup

To get started with blackbox you will need to insert the microSD memory card, plug it in to a power source and connect

an audio output. Insert the microSD card into the slot in the front edge of the unit. All of your work will be stored on this

microSD card. The card comes preloaded with presets and WAV files to get you started. You can connect the USB Power

3/18/19 6:19 PM

P. 1 of 6