1010music Blackbox 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} 1010music Blackbox에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 1010music Blackbox 6 페이지.
1010music Blackbox에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지)

페이지 인쇄

Now, push SEQS so we can watch the sequences as they play. Push PLAY now and you will hear the selected sequences

play. A progress bar at the bottom of each active SEQ shows you the play state of that sequence. Touch an SEQ to

activate or deactivate it. If you go back to PADS you can see the pads that are being triggered by the sequencer over

time. The sequences will play in a loop until you deactivate them or push STOP. If any PADS remain playing after you

push STOP, you can stop them by pushing STOP a second time. While sequences are playing, the counter in the top left

of the screen shows you how many bars and beats have played since you pushed PLAY. The counter in the top right

corner shows how many bars and beats have played in the current loop of the selected sequence.

Playing sequences is fun, but recording your own is even better. The pink square is the

currently selected sequence. You can see the sequence number of the selected sequence

at the top of the screen both on the SEQ and the PADS screen (as long as you are not in

Song mode). Select and activate a sequence you want to record into. Go to the PADS or

KEYS screen, push PLAY and REC to start recording. Start playing something by touching

the pads or the keys. The sequence will continue to play and record in a loop until you

press stop. Each subsequent loop allows you to layer more notes on top of those

previously recorded. You can have other sequences playing while you record new

sequences, or you can deactivate all sequences to record without them.

You can view and edit the sequence by pressing INFO with the sequence cell selected.

Toggle the piano roll mode between PADS and KEYS modes by touching the mode

selector to the right of the grid icon. You can touch the screen to add notes, and turn

knobs to select and adjust the length of notes. In PADS mode, each row represents a

different pad and each bar represents a trigger of that pad. In KEYS mode, each row

represents a note on the keyboard and the bars represent note events. The black and

white bars on the left side of the screen represent the notes on a keyboard and the Cs are

numbered to show you which octave you are in. Use pinch and stretch touch gestures to

zoom in and out on the piano roll. Push INFO to cycle through more sequence

parameters, such as Step Length, Step Count and Quant Size. The top left grid icon

reminds you which sequence you are editing. In KEYS mode, the top right grid icon shows

which pad is currently controlled in the piano roll. Touch this icon to switch to a different pad if you want more than one

pad in the sequence.

Song Sections

Song sections allow you to record a series of on and off events for sequences. You can

play multiple sequences simultaneously, with independent start and stop times for each

one. To hear a song section by itself, make sure all of the sequences are deactivated first.

Then push the SONG button to view the SONG screen. Touch the on screen Song button

to toggle the Song mode state to active (blue) if needed. Turn off Loop mode by touching

the Loop button as well. Now push the PLAY button and blackbox will play back a

previously recorded song, section by section. The currently playing section is highlighted

in pink. In Song mode, the context display at the top of the screen now displays the name

of the current section, e.g Section 1. On the SEQS screen, you can watch as the song

section turns sequences on and off, and you can activate additional sequences if you want. If you want one section to

3/18/19 6:19 PM

Figure 5: Sequence Piano

Roll Editor – PAD S

Sequence

Figure 6: S equence Pia no

Roll Edit or - K EYS

Sequence

Figure 7: S ON G Sc reen

P. 3 of 6