Blueridge BM18MCC 설치 매뉴얼 - 페이지 17
{카테고리_이름} Blueridge BM18MCC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blueridge BM18MCC 18 페이지. Ceiling cassette indoor air handler
Decorative Panel Installation
Detach the intake grille
Slide the 2 grille hooks toward the
middle of the decoration panel.
1 - Intake grille
2 - Grille hook
Install the decoration panel
•
Align the indicate " " on the decoration panel
to the indicate " " on the unit .
•
Attach the decoration panel to the unit with
the supplied screws as shown in figure below.
1 - Decoration panel
2 - Screws (M5) (supplied with the panel)
Revised 5/14/2020
1
2
Open the intake
grille and remove
Fig 8.2
After installing the decoration panel, ensure that
there is no space between the unit body and
decoration panel. Otherwise air may leak through
the gap and cause dewdrop. See figure below.
Fig 8.1
Mount the intake grille
Ensure that the grille is
properly seated in the
groove of the panel.
5-core wire
Fig 8.6
Fig 8.3
Fasten the control box
lid with 2 screws.
1
2
8
Fig 8.4
10-core wire
Connect the 2 wires
of the decoration
panel to the main
board of the unit.
Leave third wire plug
detached.
Fig 8.7
Close the intake
grille, and close the
2 grille hooks.
Fig 8.8
Page 17