Asko ADA Series 설치 지침 매뉴얼 - 페이지 15
{카테고리_이름} Asko ADA Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko ADA Series 20 페이지.
페이지 인쇄STEP 5. CHECKING DISHWASHER FUNCTION AND FIT
Test the dishwasher with the Rinse & Hold program.
Check that the dishwasher fills and drains properly.
Also check that none of the connections leak.
Also check that adjacent drawers and cabinet
doors can be opened when the dishwasher door
is open.
STEP 6. SECURING THE DISHWASHER
A minimum 3 ½" (89 mm) finished return is required
on all sides of the opening. Framed cabinets will
require additional finished filler material behind the
face frame for a proper installation. See illustration.
NOTE:
3 ½" (89 mm) finished returns will be visible and
should be finished to match cabinetry.
1.
Pull out the upper basket, and the center basket
if present, and turn the basket stop on the runner
outward.
2.
To make more space available when installing the
machine, remove the upper and center basket if
present.
3.
Remove the lower basket. Otherwise it easily rolls
out if you need to adjust the dishwasher during
installation.
4.
Screw the dishwasher to the counter from the inside
or to the cabinets on either side. If the counter
is a hard material, such as marble, screw the
dishwasher to the side cabinets. Use the supplied
plastic spacers when mounting the dishwasher
into place!
NOTE:
When it is not possible to attach the dishwasher
to the cabinet or the underside of the counter
top, you should install tip guards to prevent the
machine from tipping when you open the door.
Sold individually.
Tip Guards
(P/N 441487)
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
3
/
"
4
(19)
TYPICAL
3 ½" (89)
FINISHED
RETURN
W
FRAMELESS CABINETRY
Alt. 1
Alt. 2
6
5
3 ½" (89)
FINISHED
FILLER
RETURN
W
FRAMED CABINETRY
5
6
15