Asko ADA Series Handleiding voor installatie-instructies - Pagina 15

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Asko ADA Series. Asko ADA Series 20 pagina's.

Pagina afdrukken

STEP 5. CHECKING DISHWASHER FUNCTION AND FIT

Test the dishwasher with the Rinse & Hold program.

Check that the dishwasher fills and drains properly.

Also check that none of the connections leak.

Also check that adjacent drawers and cabinet

doors can be opened when the dishwasher door

is open.

STEP 6. SECURING THE DISHWASHER

A minimum 3 ½" (89 mm) finished return is required

on all sides of the opening. Framed cabinets will

require additional finished filler material behind the

face frame for a proper installation. See illustration.

NOTE:

3 ½" (89 mm) finished returns will be visible and

should be finished to match cabinetry.

Pull out the upper basket, and the center basket

if present, and turn the basket stop on the runner

outward.

To make more space available when installing the

machine, remove the upper and center basket if

present.

Remove the lower basket. Otherwise it easily rolls

out if you need to adjust the dishwasher during

installation.

Screw the dishwasher to the counter from the inside

or to the cabinets on either side. If the counter

is a hard material, such as marble, screw the

dishwasher to the side cabinets. Use the supplied

plastic spacers when mounting the dishwasher

into place!

NOTE:

When it is not possible to attach the dishwasher

to the cabinet or the underside of the counter

top, you should install tip guards to prevent the

machine from tipping when you open the door.

Sold individually.

Tip Guards

(P/N 441487)

CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM

(19)

TYPICAL

3 ½" (89)

FINISHED

RETURN

FRAMELESS CABINETRY

Alt. 1

Alt. 2

3 ½" (89)

FINISHED

FILLER

RETURN

FRAMED CABINETRY