Bluerock Tools MWS-808PMO 서비스 매뉴얼 - 페이지 5

{카테고리_이름} Bluerock Tools MWS-808PMO에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bluerock Tools MWS-808PMO 6 페이지. Wire strippers
Bluerock Tools MWS-808PMO에 대해서도 마찬가지입니다: 서비스 매뉴얼 (10 페이지)

페이지 인쇄

8. Insert key in keyway slot of the motor shaft. Note: If the key does not stay in the slot, use

a dab of grease to help it stick during reassembly.

9. Align the motor and transmission keyways. Slowly slide the motor down until the motor

flange is flush with the transmission. Note: Be sure to install the motor with the capacitor

box facing the rear of the machine.

10. Align bolt holes and insert 4 bolts into the motor flange. Use an 8mm hex wrench to

tighten bolts.

11. Install motor starter mounting bracket and use a 14mm wrench to tighten bolts.

12. Run the power cord back through the cord grip on top of the capacitor box.

Reassembly