Bluerock Tools MWS-808PMO Service Manual - Page 5

Browse online or download pdf Service Manual for Tools Bluerock Tools MWS-808PMO. Bluerock Tools MWS-808PMO 6 pages. Wire strippers
Also for Bluerock Tools MWS-808PMO: Service Manual (10 pages)

Print Page

8. Insert key in keyway slot of the motor shaft. Note: If the key does not stay in the slot, use

a dab of grease to help it stick during reassembly.

9. Align the motor and transmission keyways. Slowly slide the motor down until the motor

flange is flush with the transmission. Note: Be sure to install the motor with the capacitor

box facing the rear of the machine.

10. Align bolt holes and insert 4 bolts into the motor flange. Use an 8mm hex wrench to

tighten bolts.

11. Install motor starter mounting bracket and use a 14mm wrench to tighten bolts.

12. Run the power cord back through the cord grip on top of the capacitor box.

Reassembly