d&b audiotechnik SL Series 리깅 매뉴얼 - 페이지 4

{카테고리_이름} d&b audiotechnik SL Series에 대한 리깅 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik SL Series 8 페이지.
d&b audiotechnik SL Series에 대해서도 마찬가지입니다: 매뉴얼 (13 페이지), 매뉴얼 (13 페이지), 매뉴얼 (13 페이지), 매뉴얼 (13 페이지)

페이지 인쇄

Preparations and application

Attaching and fixing the steel wire ropes

To prevent the Socket pins from loosening, prepare the pins as

follows:

Tools required: Screwdriver Torx #T20 ( )

1. Attach the key ring of the steel wire [6] to the Socket pins [5].

2. On the outrig pole for the winder base, fix the wire [6 ]to the

corresponding hole position using the enclosed self-tapping

torx screws [7].

3. On the cart, fix the wires [6] to the opposite hole positions

beside the outrig slots in each corner of the cart using the

enclosed self-tapping torx screws [7].

Attaching the winder base

1. Release the Socket pin [5] on the pole.

2. Insert the winder base [1] into the pole.

3. Reinsert the Socket pin [5] and ensure it is fully inserted and

locked.

Preparations and application

d&b E7494 Rigging manual 1.3 en