d&b audiotechnik SL Series Rigging handleiding - Pagina 4

Blader online of download pdf Rigging handleiding voor {categorie_naam} d&b audiotechnik SL Series. d&b audiotechnik SL Series 8 pagina's.
Ook voor d&b audiotechnik SL Series: Handmatig (13 pagina's), Handmatig (13 pagina's), Handmatig (13 pagina's), Handmatig (13 pagina's)

Pagina afdrukken

Preparations and application

Attaching and fixing the steel wire ropes

To prevent the Socket pins from loosening, prepare the pins as

follows:

Tools required: Screwdriver Torx #T20 ( )

1. Attach the key ring of the steel wire [6] to the Socket pins [5].

2. On the outrig pole for the winder base, fix the wire [6 ]to the

corresponding hole position using the enclosed self-tapping

torx screws [7].

3. On the cart, fix the wires [6] to the opposite hole positions

beside the outrig slots in each corner of the cart using the

enclosed self-tapping torx screws [7].

Attaching the winder base

1. Release the Socket pin [5] on the pole.

2. Insert the winder base [1] into the pole.

3. Reinsert the Socket pin [5] and ensure it is fully inserted and

locked.

Preparations and application

d&b E7494 Rigging manual 1.3 en