d&b audiotechnik Z5406 Flying bracket 12S 설치 지침 - 페이지 4
{카테고리_이름} d&b audiotechnik Z5406 Flying bracket 12S에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik Z5406 Flying bracket 12S 14 페이지.
페이지 인쇄1. Z5404/05/06 Flying bracket 8S/10S/12S
Fig. 1: Scope of supply
4
1.1. Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1
Z5404
d&b Flying bracket 8S [1a]
1
Z5405
d&b Flying bracket 10S [1b]
1
Z5406
d&b Flying bracket 12S [1c]
Each including:
Pan head screw (Torx #T45) M8 x 20 [2]
2
Spring washer [3]
2
Torx key [4] (size #T45)
1
1
D2958
Mounting instructions
Technical information
Weight Flying bracket 8S
Weight Flying bracket 10S
Weight Flying bracket 12S
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case you have any doubt as to the proper
functioning and safety of the items, these must be withdrawn from
use immediately.
Load safety information
Always align the bracket vertically when using it, whether it is
suspended or placed on top of a loudspeaker stand.
The maximum permitted working load of the Z5404 Flying bracket
8S is 7.4 kg (16 lb) (according to BGV C1) which corresponds to
the weight of one 8S loudspeaker.
The maximum permitted working load of the Z5405 Flying bracket
10S is 13 kg (29 lb) (according to BGV C1) which corresponds to
the weight of one 10S or 10S-D loudspeaker, respectively.
The maximum permitted working load of the Z5406 Flying bracket
12S is 17 kg (37 lb) (according to BGV C1) which corresponds to
the weight of one 12S or 12S-D loudspeaker, respectively.
d&b Z5404/05/06 Mounting instructions 1.1 en
1.6 kg / 3.5 lb
2.8 kg / 6.2 lb
2.9 kg / 6.4 lb