d&b audiotechnik Z5406 Flying bracket 12S 설치 지침 - 페이지 6

{카테고리_이름} d&b audiotechnik Z5406 Flying bracket 12S에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik Z5406 Flying bracket 12S 14 페이지.

Attaching the bracket to the cabinet

NOTICE!

▪ Only use the supplied and specified screws [2], otherwise there

a risk of damaging the threaded inserts.

▪ Always use the spring washers [3] to prevent the bolts from

slackening.

Tools required:

▪ Torx key (size #T45 - supplied with the bracket)

1. Attach the bracket to the two M8 threaded inserts on the rear

panel of the cabinet.

2. Insert the screws together with the spring washers and

U washers and tighten them.

Vertical alignment

To set the vertical angle, proceed as follows:

Tools required:

▪ Torx key (size #T45 - supplied with the bracket)

1. Slacken the fixing bolts [F].

2. Set the cabinet to the desired vertical angle.

3. Retighten the fixing bolts.

d&b Z5404/05/06 Mounting instructions 1.1 en