d&b audiotechnik Z Series 설치 지침 - 페이지 9

{카테고리_이름} d&b audiotechnik Z Series에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik Z Series 11 페이지. Al flying adapter
d&b audiotechnik Z Series에 대해서도 마찬가지입니다: 설치 지침 (14 페이지), 설치 지침 (8 페이지), 설치 지침 (7 페이지), 리깅 매뉴얼 (18 페이지), 설치 지침 (12 페이지), 설치 지침 (10 페이지)

페이지 인쇄

d&b Z5147 Mounting instructions 2.3 en

Adjusting the lever

To ensure proper clamping and even gap dimensions [S] to both

sides of the clamping halves of the rotatable unit [4] while the

lever [3] is in its hinged position (90°), the clamping screw [3a]

needs to be regularly adjusted as follows:

Tools required:

▪ Allen hex key 4 mm

1. Open the lever [3].

2. Adjust the clamping screw [3a] so that the screw only just

begins to tighten.

3. Completely close the lever [3] (90°).

↳ Even and proper clamping of the two clamping halves must

be achieved.

If necessary, gradually readjust the clamping screw by a

further ½ turn.

4. Recheck the gap dimensions [S] on both sides.

↳ On the lever side, the two clamping halves must not be

blocked.