d&b audiotechnik Z Series Istruzioni per il montaggio - Pagina 9

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Supporto per TV d&b audiotechnik Z Series. d&b audiotechnik Z Series 11. Al flying adapter
Anche per d&b audiotechnik Z Series: Istruzioni per il montaggio (14 pagine), Istruzioni per il montaggio (8 pagine), Istruzioni per il montaggio (7 pagine), Manuale d'attrezzatura (18 pagine), Istruzioni per il montaggio (12 pagine), Istruzioni per il montaggio (10 pagine)

d&b Z5147 Mounting instructions 2.3 en

Adjusting the lever

To ensure proper clamping and even gap dimensions [S] to both

sides of the clamping halves of the rotatable unit [4] while the

lever [3] is in its hinged position (90°), the clamping screw [3a]

needs to be regularly adjusted as follows:

Tools required:

▪ Allen hex key 4 mm

1. Open the lever [3].

2. Adjust the clamping screw [3a] so that the screw only just

begins to tighten.

3. Completely close the lever [3] (90°).

↳ Even and proper clamping of the two clamping halves must

be achieved.

If necessary, gradually readjust the clamping screw by a

further ½ turn.

4. Recheck the gap dimensions [S] on both sides.

↳ On the lever side, the two clamping halves must not be

blocked.