d&b audiotechnik Z Series Istruzioni per il montaggio - Pagina 7

Sfoglia online o scarica il pdf Istruzioni per il montaggio per Supporto per TV d&b audiotechnik Z Series. d&b audiotechnik Z Series 11. Al flying adapter
Anche per d&b audiotechnik Z Series: Istruzioni per il montaggio (14 pagine), Istruzioni per il montaggio (8 pagine), Istruzioni per il montaggio (7 pagine), Manuale d'attrezzatura (18 pagine), Istruzioni per il montaggio (12 pagine), Istruzioni per il montaggio (10 pagine)

[3]

d&b Z5147 Mounting instructions 2.3 en

1.6 Operation / adjustments

Positional adjustment (horizontal position)

NOTICE!

Potential risk of damage to material

Only carry out positional and directional adjustments one at a

time. Never try to make more than one adjustment without having

all others firmly locked.

If an adjustment of the position on the bar is necessary, proceed as

follows:

1. Release the handwheel [2] only so far that the grip on the bar

is loosened.

2. While supporting the weight of the assembly, you can now

make the positional adjustment.

↳ Make sure you do not damage the tube (notching).

3. Re-tighten the handwheel after any adjustments.

Horizontal alignment

Horizontal adjustments can be made using the rotatable unit of the

clamp, which can be rotated through 360° in both directions.

Proceed as follows:

1. Open the eccentric lever [3] of the clamp.

2. Set the desired horizontal angle.

↳ The angle can be read-off on the scale in relation to the

marking (point) on the clamp. Every graduation mark

corresponds to an increment of 10°. The larger marks

indicate an increment of 30°.

3. Close the eccentric lever [3].