d&b audiotechnik Z Series Instrukcja montażu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Uchwyt TV d&b audiotechnik Z Series. d&b audiotechnik Z Series 11 stron. Al flying adapter
Również dla d&b audiotechnik Z Series: Instrukcja montażu (14 strony), Instrukcja montażu (8 strony), Instrukcja montażu (7 strony), Podręcznik olinowania (18 strony), Instrukcja montażu (12 strony), Instrukcja montażu (10 strony)

[3]

d&b Z5147 Mounting instructions 2.3 en

1.6 Operation / adjustments

Positional adjustment (horizontal position)

NOTICE!

Potential risk of damage to material

Only carry out positional and directional adjustments one at a

time. Never try to make more than one adjustment without having

all others firmly locked.

If an adjustment of the position on the bar is necessary, proceed as

follows:

1. Release the handwheel [2] only so far that the grip on the bar

is loosened.

2. While supporting the weight of the assembly, you can now

make the positional adjustment.

↳ Make sure you do not damage the tube (notching).

3. Re-tighten the handwheel after any adjustments.

Horizontal alignment

Horizontal adjustments can be made using the rotatable unit of the

clamp, which can be rotated through 360° in both directions.

Proceed as follows:

1. Open the eccentric lever [3] of the clamp.

2. Set the desired horizontal angle.

↳ The angle can be read-off on the scale in relation to the

marking (point) on the clamp. Every graduation mark

corresponds to an increment of 10°. The larger marks

indicate an increment of 30°.

3. Close the eccentric lever [3].