d&b audiotechnik Z Series Montageanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Montageanleitung für TV-Halterung d&b audiotechnik Z Series herunter. d&b audiotechnik Z Series 11 Seiten. Al flying adapter
Auch für d&b audiotechnik Z Series: Montageanleitung (14 seiten), Montageanleitung (8 seiten), Montageanleitung (7 seiten), Handbuch Takelage (18 seiten), Montageanleitung (12 seiten), Montageanleitung (10 seiten)

[3]

d&b Z5147 Mounting instructions 2.3 en

1.6 Operation / adjustments

Positional adjustment (horizontal position)

NOTICE!

Potential risk of damage to material

Only carry out positional and directional adjustments one at a

time. Never try to make more than one adjustment without having

all others firmly locked.

If an adjustment of the position on the bar is necessary, proceed as

follows:

1. Release the handwheel [2] only so far that the grip on the bar

is loosened.

2. While supporting the weight of the assembly, you can now

make the positional adjustment.

↳ Make sure you do not damage the tube (notching).

3. Re-tighten the handwheel after any adjustments.

Horizontal alignment

Horizontal adjustments can be made using the rotatable unit of the

clamp, which can be rotated through 360° in both directions.

Proceed as follows:

1. Open the eccentric lever [3] of the clamp.

2. Set the desired horizontal angle.

↳ The angle can be read-off on the scale in relation to the

marking (point) on the clamp. Every graduation mark

corresponds to an increment of 10°. The larger marks

indicate an increment of 30°.

3. Close the eccentric lever [3].