d&b audiotechnik Z Series Instrucciones de montaje - Página 7

Navegue en línea o descargue pdf Instrucciones de montaje para Soporte para TV d&b audiotechnik Z Series. d&b audiotechnik Z Series 11 páginas. Al flying adapter
También para d&b audiotechnik Z Series: Instrucciones de montaje (14 páginas), Instrucciones de montaje (8 páginas), Instrucciones de montaje (7 páginas), Manual de aparejo (18 páginas), Instrucciones de montaje (12 páginas), Instrucciones de montaje (10 páginas)

[3]

d&b Z5147 Mounting instructions 2.3 en

1.6 Operation / adjustments

Positional adjustment (horizontal position)

NOTICE!

Potential risk of damage to material

Only carry out positional and directional adjustments one at a

time. Never try to make more than one adjustment without having

all others firmly locked.

If an adjustment of the position on the bar is necessary, proceed as

follows:

1. Release the handwheel [2] only so far that the grip on the bar

is loosened.

2. While supporting the weight of the assembly, you can now

make the positional adjustment.

↳ Make sure you do not damage the tube (notching).

3. Re-tighten the handwheel after any adjustments.

Horizontal alignment

Horizontal adjustments can be made using the rotatable unit of the

clamp, which can be rotated through 360° in both directions.

Proceed as follows:

1. Open the eccentric lever [3] of the clamp.

2. Set the desired horizontal angle.

↳ The angle can be read-off on the scale in relation to the

marking (point) on the clamp. Every graduation mark

corresponds to an increment of 10°. The larger marks

indicate an increment of 30°.

3. Close the eccentric lever [3].