Asko HG1666AD 전환 지침 - 페이지 5
{카테고리_이름} Asko HG1666AD에 대한 전환 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko HG1666AD 9 페이지.
페이지 인쇄
NOTE!
4. Install the silicon sealing plugs, marked with a letter A, B and C in the air holes of the
corresponding burners.
If applicable (see table).
Gas
P
ULPG
2.75 kPa
5. Replace the fitted governor by the test point adapter.
6. Place label "Universal LPG" over the label "Natural gas" at the underside of the appliance and
in the cupboard.
Check for gas tightness and operation
When the appliance is connected to the gas supply, use leakage test spray to check the gas
tightness.
A. Check leakage of the installation:
1. Open the main gas valve.
2. Check leakage of connections by spraying leakage test spray on the connections and check
for gas tightness.
B. Check the leakage of the injectors:
1. Seal the injector.
The injector for the outer burner is the one at the bottom, the upper
injector is for the inner burner.
A
a
B
0.46
0.26
0.60
Conversion instruction
b
C
c
H1
0.30
0.72
0.36
0.93
H2
h
Plug
0.40
0.40
✔
5