Ambient Weather WS-1285 사용자 설명서 - 페이지 11

{카테고리_이름} Ambient Weather WS-1285에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-1285 16 페이지. Advanced weather station

This pressure threshold setting is displayed on the console in the form of bars (1 to 4), as shown in

Figure 5.

4.5.6 Storm alert threshold

The storm threshold (the negative rate of pressure change signifying a storm is expected) can be

adjusted by the user from level 3 to level 5 (the default level 4 mbar/hour).

When negative rate of change of pressure is exceeded for 3 hours, the storm warning indicator will be

activated, and the clouds with rain icon and tendency arrows will flash for 3 hours indicating the storm

warning feature has been activated.

When the temperature is between 27 degC and 34 degC, the ice alert icon will be present.

An indoor comfort icon indicates the comfort zone based on indoor humidity, as shown in Figure 7.

The WS-1175 supports up to three WH-3C remote thermometers (one is included). The optional

sensors can be purchased at AmbientWeather.com.

Power up the sensors and console in the following order:

1. Power up the console. Do not touch any of the buttons, as described in Section 2.4.

2. Power up the first remote thermometer as described in Section 2.5. Wait until the sensor

reports into the console.

3. Power up the second remote thermometer as described in Section 2.5. Wait until the sensor

reports to the console. The first sensor will be designated as Channel 1 and the second sensor

will be designated as Channel 2.

Version 1.0

Figure 5

Figure 6

RH 45%~65%

RH<45%

Dry

Comfortable

Figure 7

RH >65%

Wet

Page 11