Ambient Weather WS-0416 사용자 설명서 - 페이지 8

{카테고리_이름} Ambient Weather WS-0416에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-0416 16 페이지. Wireless indoor/outdoor 8-channel thermo-hygrometer

페이지 인쇄

5 Console Operation

Note: The console has three buttons for easy operation: MIN/MAX/- button, SET button, and

CH/+ button.

5.1 Min/Max Mode

The Min/Max mode displays the minimum and maximum temperature and humidity (since reset of the

unit) for the indoor, remote channel 1 through 8 sensors.

Prior to entering the MIN/MAX mode, press the CH/+ button to select the temperature and humidity

values you wish to view.

1. Display Maximum. Press the MIN/MAX button once to display the maximum. The

icon will be displayed.

2. Clear Maximum. To reset the maximum values to the current values, press and hold the

MIN/MAX button for 3 seconds.

3. Display Minimum. Press the MIN/MAX button again to display the minimum. The

icon will be displayed.

4. Clear Minimum. To reset the minimum values to the current values, press and hold the

MIN/MAX button for 3 seconds.

To return to normal mode, press the MIN/MAX button again.

5.2 Clearing Min/Max Daily

The minimum and maximum can be set to clear daily (every 24 hours automatically) or manually.

Press and hold the SET button for 3 seconds to switch between

When you manually clear the minimum and maximum, the Clears Daily function will clear every 24

hours from the time you clear it.

For example, if you clear the min and max at 4:00pm, it will continue to clear every day at 4:00pm.

5.3 Backlight Operation

To temporarily turn on the back light for five seconds, press the any button on the indoor sensor.

5.4 Indoor/Outdoor Channel Selection

Press the CH/+ button to switch the display between the indoor temperature and humidity

remote sensors 1 through 8, and scroll mode

outdoor sensors will be displayed in five second intervals.

5.5 Temperature Units of Measure

The default temperature units of measure are degrees Fahrenheit. To toggle between degrees Celsius

and degrees Fahrenheit, press and hold the MIN/MAX button for 3 seconds.

5.6 Sensor Search Mode

If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire

the signal:

Version 1.0

and Clears Manually.

. In scroll mode, all of the indoor and detected

Page 8