Ambient Weather WS-0416 Kullanıcı Kılavuzu - Sayfa 8
Termometre Ambient Weather WS-0416 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather WS-0416 16 sayfaları. Wireless indoor/outdoor 8-channel thermo-hygrometer
Sayfayı Yazdır
5 Console Operation
Note: The console has three buttons for easy operation: MIN/MAX/- button, SET button, and
CH/+ button.
5.1 Min/Max Mode
The Min/Max mode displays the minimum and maximum temperature and humidity (since reset of the
unit) for the indoor, remote channel 1 through 8 sensors.
Prior to entering the MIN/MAX mode, press the CH/+ button to select the temperature and humidity
values you wish to view.
1. Display Maximum. Press the MIN/MAX button once to display the maximum. The
icon will be displayed.
2. Clear Maximum. To reset the maximum values to the current values, press and hold the
MIN/MAX button for 3 seconds.
3. Display Minimum. Press the MIN/MAX button again to display the minimum. The
icon will be displayed.
4. Clear Minimum. To reset the minimum values to the current values, press and hold the
MIN/MAX button for 3 seconds.
To return to normal mode, press the MIN/MAX button again.
5.2 Clearing Min/Max Daily
The minimum and maximum can be set to clear daily (every 24 hours automatically) or manually.
Press and hold the SET button for 3 seconds to switch between
When you manually clear the minimum and maximum, the Clears Daily function will clear every 24
hours from the time you clear it.
For example, if you clear the min and max at 4:00pm, it will continue to clear every day at 4:00pm.
5.3 Backlight Operation
To temporarily turn on the back light for five seconds, press the any button on the indoor sensor.
5.4 Indoor/Outdoor Channel Selection
Press the CH/+ button to switch the display between the indoor temperature and humidity
remote sensors 1 through 8, and scroll mode
outdoor sensors will be displayed in five second intervals.
5.5 Temperature Units of Measure
The default temperature units of measure are degrees Fahrenheit. To toggle between degrees Celsius
and degrees Fahrenheit, press and hold the MIN/MAX button for 3 seconds.
5.6 Sensor Search Mode
If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire
the signal:
Version 1.0
©Copyright 2017, Ambient LLC. All Rights Reserved.
and Clears Manually.
. In scroll mode, all of the indoor and detected
,
Page 8