ACR Electronics ARTEX GLOBALFIX V4 제품 지원 매뉴얼 - 페이지 11
{카테고리_이름} ACR Electronics ARTEX GLOBALFIX V4에 대한 제품 지원 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Electronics ARTEX GLOBALFIX V4 20 페이지. 406 mhz gps epirb
ACR Electronics ARTEX GLOBALFIX V4에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (11 페이지)
페이지 인쇄
Step 2: Mount the bracket
Category I bracket mounting: To access the bracket's five pre-drilled mounting holes, remove the bracket's lid by
turning the spring loaded knob on the lid 1/4 turn counterclockwise and pulling. The lid will lift away from the top of the
base and disengage at the bottom of the base. The lid is tethered to the base to help prevent loss. (If this tether is
somehow broken off, please have it replaced to prevent the inadvertent loss of the top cover.) Pull the beacon with
steady pressure from the bracket. For normal use situations, four of the five holes can be used to mount the bracket. It is
therefore not necessary to remove the HydroFix HRU to mount the bracket using all five holes. For extreme use
situations, remove the HydroFix HRU and deploy the ejector spring for access to the fifth mounting hole. Hold the bracket
in place to mark the screw holes or use the provided mounting template. The use of #10 pan head stainless steel
fasteners [minimum of ½" (1.27 cm) long] and #10 ½" (1.27 cm) washers is recommended.
NOTE: FASTENERS AND WASHERS NOT INCLUDED.
11 |
P a g e