ambiq micro Apollo2 Blue 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} ambiq micro Apollo2 Blue에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ambiq micro Apollo2 Blue 12 페이지. Evb
ambiq micro Apollo2 Blue에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄

Quick Start Guide for

Apollo2 EVB (Rev 1.0)

Revision 1.0, June 2017

Figure 4. Apollo2 EVB's DEBUG OUT Header (J3)

To utilize this functionality, use a 10-pin low-pitch standard debug connector to connect the "DEBUG OUT"

header (J3) on the EVB to the debug header on the target board. The EVB will automatically detect when the

"DEBUG OUT" header is connected to another target board and reconfigure the integrated J-Link to connect to

this external board rather than the onboard Apollo2.

Note: A voltage on VDD_EXT_DBG (pin 1) through the 10-pin header is required for the automatic switch. Also,

to avoid voltage level conflicts on the debug I/O, VDDIO on the J-Link processor will need to be changed to

VDD_EXT_DBG by cutting SB5 and connecting SB6 if VDD_EXT_DBG doesn't match the on-board voltage

(VDD_PS by default).

QS-A2-1p00

Page 8 of 11